Kyocera KM-NET - Manual (Page 34)

Properties
30 KM-NET for Clients
Timer Auto panel reset Specifies the time for auto panel reset.
When this function is enabled, if no
operation has been performed on the
operator panel during a specified time,
the display automatically returns to the
default.
Form feed timeout Adjusts the form feed timeout time. If the
printer receives no data for a certain
period, it will time out and release the
current interface. It prints whatever data
it has in its buffer and feeds out the
page.
Auto sleep Specifies sleep timer setting value. If the
printing system has not been used for a
specified time, it will enter sleep mode.
Click Advanced to enable or disable the
Auto Sleep.
Security Panel lock Displays the setting of panel lock.
Password Enter the password for locking the
operation panel.
Identification Asset number Specifies the Asset number for the
printing system. The maximum length of
asset number is 15 characters.
The User defined
settings Specifies the Nickname and
Description for the printing system. The
maximum length of nickname and
description is 64 characters.
Address Book Edit Click this button to open the Edit dialog
box of the Address Book. For details,
refer to Address Book on page 32.
User login User list Confirms the users registered in the
printing system.
When a dialog appears prompting entry
of a login user name and password,
enter them and click OK.
Main Item Sub Item Description