KVH Industries KVHTRACVISION G4 - Manual (Page 85)

Setting Display Brightness
The ADCU display’s brightness may be adjusted to suit your
preferences. Press the right key to make the display brighter, the
left key to make it dimmer. When you are satisfied with the
setting, press the center key to accept the setting.
Selecting Heading Reference Source
The Heading Reference Source menu provides the option to
override the GyroTrac’s external sensor module in favor of
another source, such as a ship’s gyro, as follows:
• INTERNAL – GyroTrac will receive and use
heading data from its sensor module. The Control
Compass menus will be available.
• EXTERNAL – GyroTrac will receive and use
heading data from an external heading source. As
a result, the Control Compass menus will be
inactive and hidden. Refer to Figure 2-21 on
page 30 for details on connecting a ship’s gyro to
the ADCU.
54-0147 74
TracVision G4 Technical Manual
Proceed to "Entering
Gyro Offset Values"
Set Heading int/ext?
Yes Next Return
Reference: Internal
Int ENTER Ext
Setting will blink "Internal"
or "External" based on the
current selection. Pushing
the INT or EXT buttons will
toggle between selections.
Figure 3-17
Internal/External Reference Menus
Proceed to "Selecting
Heading Reference
Source"
Set brightness?
Yes Next Return
Min Bright Max
*****************
Dim Display Brighten Display
The ADCU display offers
20 levels of brightness,
each of which is indicated
by an asterisk that
appears or disappers
when the Dim and
Brighten keys are pressed.
Figure 3-16
Display Brightness Controls