Selecting active satellite, Figure 3-34 select active satellite – KVH Industries KVHTRACVISION G4 User Manual
Page 98
Advertising
Selecting Active Satellite
These screens are only seen if the GyroTrac ADCU is connected
to a TracVision G4.
After installing the active pair of satellites, use the Select Satellite
menu to choose which of the installed satellites will be active.
Using the ADCU Interface
54-0147
87
Proceed to "Updating Satellite
Frequency Data"
Select Satellite?
Enter
Next
Return
Select <SAT NAME A>
Yes
Next
Cancel
Select <SAT NAME B>
Yes
Next
cancel
Sat Name A
corresponds to the
first satellite selected
during the Install
Satellite process.
Sat Name B
corresponds to the
second satellite
selected during the
Install Satellite
process.
<SAT NAME A> selected
<SAT NAME B> selected
Figure 3-34
Select Active Satellite
Advertising