Using a serial cable connection, Connecting to a windows-based computer – Kodak DC3400 User Manual
Page 104
Advertising
96
Using a Serial Cable Connection
The traditional means of connecting the camera to your computer is by serial
cable. When connecting the camera, it is a good idea to use a KODAK-specified
AC adapter (see page 5) to conserve battery power.
Connecting to a Windows-Based Computer
An RS-232 serial cable is provided so you can connect your camera to a
Windows-based computer.
1 Set the Mode dial to Connect.
2 Plug the appropriate end of the serial
cable into an available 9-pin serial port on
the computer.
MENU
REVIEW
CONNECT
SETUP
CAMERA
CAPTURE
Advertising