Kodak DC3400 - Manual (Page 12)

4
Checking Batteries
So that you are never caught with dead batteries your camera indicates the
power level of the batteries. A battery status symbol appears, on the Status
Display when you turn on the camera.
For information on guidelines for battery usage, see page 135.
1 Set the Mode dial to Capture, Review, or
Camera Settings.
The battery status symbol is not visible if you
set the camera to Connect.
2 Slide the POWER switch to the right to turn
on the camera.
3 Check the battery status symbol on the Status
Display.
 Full (No Icon)—indicates that
batteries are charged and ready to use.
 Low—indicates batteries are not fully
charged and will soon need to be
replaced or recharged.
 Exhausted (blinking)—indicates
batteries are too weak to power the
camera and need to be replaced.
SETUP
CONNECT
CAMERA
REVIEW
CAPTURE