Kodak DC3400 - Manual (Page 46)

38
Selecting a White Balance for Indoor
Pictures
If you use your camera indoors where flash is prohibited, your pictures may
take on a green tint if captured under fluorescent tube lighting, or a reddish-
orange tint if captured under tungsten household lighting. You can correct this
problem using the White Balance feature on the camera. Use the Auto setting
for everyday pictures. Use the Daylight, Fluorescent, or Tungsten setting for
taking pictures under these lighting conditions without flash.
1 Set the Mode dial to Capture.
2 Slide the POWER switch to the right to
turn on the camera.
3 Press the Menu button.
The main Menu screen appears on the
LCD.
4 Press a button until the icon
is highlighted.
5 Press the DO-IT button.
The White Balance screen appears on
the LCD. The current setting is checked
(9).
6 Press a button until the White
Balance option you want is highlighted.
MENU
REVIEW
CONNECT
SETUP CAMERA
CAPTURE
/
/