Putting yourself in the picture – Kodak DC3400 User Manual

Page 31

Advertising
background image

2

23

Putting Yourself in the Picture

There might be times when you want everyone, including yourself, to be in the
picture. For these occasions, use the Self-Timer feature to create a 10-second
delay between the time you press the SHUTTER button and the time the picture
is taken.

1 Set the Mode dial to Capture.
2 Slide the POWER switch to the right to

turn on the camera.

3 Press the SELF-TIMER button.

The Self-timer icon appears in the
Status Display.
If you want to cancel self-timer before the
picture is taken, press the SELF-TIMER
button again or turn off the camera.

4 Place the camera on a flat, steady surface

or tripod.

5 Frame your subject in the viewfinder and

press the SHUTTER button.
The red Self-Timer light, on the front of
the camera, turns on and stays lit for 8
seconds, then flashes for 2 additional
seconds just before the picture is taken
.
The Self-Timer turns off when the picture
is taken.

MENU

REVIEW

CONNECT

SETUP

CAMERA

CAPTURE

Advertising