Connecting to a macintosh computer, 98 connecting to a macintosh computer – Kodak DC3400 User Manual
Page 106
Advertising
98
Connecting to a Macintosh Computer
Either a serial cable for a Macintosh computer or adapter plug for use with the
RS-232 serial cable is provided so that you can connect your camera through a
serial port on a Macintosh computer.
1 Set the Mode dial to Connect.
2 Connect the serial port adapter plug into
the 9-pin end of the serial cable.
3 Plug the adapter end of the serial cable
into an available serial port on the back of
the computer.
MENU
REVIEW
CONNECT
SETUP
CAMERA
CAPTURE
Advertising