Kodak DC3400 - Manual (Page 25)

2
17
Viewing the Picture Just Taken
You can view or delete a picture seconds after it is. It is a handy way to check if
your subject was positioned correctly.
1 Set the Mode dial to Capture.
2 Slide the POWER switch to the right to
turn on the camera.
3 Press the SHUTTER button to take a
picture.
4 Press the button.
The picture just taken appears in the
LCD for several seconds with the delete
icon above the
button.
If you want to view the picture again,
press the
button.
5 To delete the picture, press the
button.
The Delete Picture screen appears on
the LCD.
6 Press a button until YES
is highlighted.
7 Press the DO-IT button.
The picture is permanently deleted
from the camera memory card.
MENU
REVIEW
CONNECT
SETUP CAMERA
CAPTURE
/