Kodak DCS500 User Manual
Page 162
8-43
8
Expos
ure
By setting exposure compensation after setting the auto exposure bracketing step amount,
you can take three sequential overexposed or underexposed shots while varying the
compensation for each shot. The bracketing step amount is not changed even when
shifting the standard (metered) exposure.
Auto exposure bracketing cannot be used in Bulb Exposure mode or when using flash.
5
To cancel auto exposure
bracketing, repeat steps 1 and 2,
resetting the bracketing amount
to 0.
Auto exposure bracketing is also
canceled when the lens is
exchanged, Bulb Exposure
mode is set, flash charge
completion is loaded, the Clear
button is pressed, or the Main
switch is set to (
).
The camera can be set so that auto
exposure bracketing is not canceled
when the lens is exchanged or the
Main switch is set to (
).
L
Custom Function F-9
L