Resetting the camera to its initial settings, Resetting all camera functions, Resetting the camera to its initial settings -19 – Kodak DCS500 User Manual
Page 95: Resetting all camera functions -19, White balance -1
6-19
6
C
onf
iguring
Resetting the Camera to Its Initial Settings
Resetting All Camera Functions
Reset all of the camera’s functions
(except for the custom functions) to
their default settings by opening the
palm door and pressing the Clear
button. After resetting, the camera’s
functions are set as shown below:
Function
Setting
Shooting mode
Program AE (P) mode
AF mode
One-shot AF
Metering mode
Evaluative metering
Drive mode
Single exposure (
)
Custom functions
Not affected
Caution:
✔ When custom function F-8 is set for center-weighted average metering instead
of evaluative metering, and the metering mode is set to partial metering or spot
metering, pressing the Clear button will reset all of the camera functions except
for the Metering mode, which remains at the current setting.