Kodak DCS500 - Manual (Page 230)

14-7
14
Camer
a Car
e
Cleaning the Imager
If the imager is dirty, please check the Kodak Web site for instructions.
Reassembling the Camera
You will need to reassemble your camera after inspecting or cleaning the imager.
If you chose Cancel, you can
turn off the camera and replace
the anti-aliasing filter and lens.
If you chose OK, the mirror
raises and the shutter opens.
The imager is visible through
the lens mounting flange.
The Close Shutter screen
appears.
10 Hold the camera so that light
reflects off the imager. Visually
inspect the imager.
1 Select Yes in the Close Shutter
screen.
The mirrors lower and the
shutter closes.
2 Turn off the camera.
3 Carefully replace the anti-
aliasing or IR filter.
4 Replace the lens.