Kenwood TS-570S TS-570D - Manual (Page 48)

42
10 MEMORY FEATURES
MEMORY TRANSFER
■ Memory ➡ VFO Transfer
After retrieving frequencies and associated data in
Memory Recall mode, you can copy this data to the
VFO. This function is useful, for example, when the
frequency you want to monitor is near the frequency
stored in a memory channel.
1 Recall the desired memory channel.
2 Press [M>VFO].
• When a simplex channel is recalled, the data
is copied to VFO A or VFO B, depending on
which VFO was used to recall the channel.
• When a split channel is recalled, the RX data
is copied to VFO A and the TX data is copied
to VFO B.
Note:
◆ The Memory Channel Lockout status and the subtone
frequency are not copied.
◆ Pressing [M>VFO] after temporarily changing the retrieved
data copies the new data to the VFO.
■ Channel
➡ Channel Transfer
You can also copy the contents of one memory
channel to another memory channel. This function is
useful when storing frequencies and associated data
that you temporarily change in Memory Recall mode.
1 Recall the desired memory channel.
2 Press [M.IN] to enter Memory Scroll mode.
• To exit Memory Scroll mode, press [CLR].
3 Select the memory channel to which you would
like this data copied.
4 Press [M.IN] again.
The tables below illustrate how data is transferred
between memory channels:
Channel 00 ~ 89
➡
➡
➡
➡
➡
➡
➡
➡
Channel 00 ~ 89
➡
RX frequency
TX frequency
Mode for RX
Mode for TX
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout OFF
RX frequency
TX frequency
Mode for RX
Mode for TX
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout ON/OFF
Channel 90 ~ 99
➡
➡
➡
➡
➡
➡
➡
➡
Channel 00 ~ 89
➡
TX/RX frequency
Start frequency
End frequency
Mode for TX/RX
—
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout OFF
RX frequency
TX frequency
Mode for RX
Mode for TX
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout ON/OFF
Channel 90 ~ 99
➡
➡
➡
➡
➡
➡
➡
➡
Channel 90 ~ 99
➡
TX/RX frequency
Mode for TX/RX
Start frequency
End frequency
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout ON/OFF
TX/RX frequency
Mode for TX/RX
Start frequency
End frequency
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout OFF
Channel 00 ~ 89
➡
➡
➡
➡
➡
➡
Channel 90 ~ 99
➡
RX frequency
TX frequency
Mode for RX
Mode for TX
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout OFF
TX/RX frequency
Mode for TX/RX
Subtone frequency
Tone ON/OFF
CTCSS ON/OFF
Memory Channel
Lockout ON/OFF