Kenwood FS260 - Manual (Page 8)

● Before cleaning, always switch off, unplug and let everything cool.
● Never put your steamer base in water or let the cord or plug get wet.
cleaning
water tank ● Empty, then swill out with warm water and dry.
outside ● Wipe with a damp cloth, then dry.
all other parts ● Wash, then dry.
● You can wash the plastic parts (excluding steamer base) on the top
rack of your dishwasher.
descaling ● Descale after 7-10 uses, depending on how hard your water is.
Descaling increases steam power and helps your steamer last longer.
1 Remove all parts except the strainer.
2 Pour clear vinegar into the tank up to 'Max'. Don't use a descaler.
3 Plug in and set the timer for 20-25 minutes. Unplug if the vinegar
overflows.
4 Unplug and when the steamer is cool, pour away the vinegar and swill
out the tank several times with water.
KENWOOD FS250 & FS260
care and cleaning
7
GB