Kensington M Series - Manual (Page 45)

36 Ascentia M Series User’s Manual
Installing a Hard Drive
To install a hard drive:
1. Remove the old hard drive from the computer as
described in the previous section.
2. Slide the new drive into the hard drive compartment.
Make sure the drive is pushed back as far as it will go.
3. Install the screw that holds the hard drive in place.
4. If you intend to use save to disk mode, see “Creating a
Save to Disk Partition” on page 64.
5. Format your drive and reinstall your files.
3754-1.bk : 3754-2.fm Page 36 Wednesday, July 30, 1997 2:33 PM