Kensington M Series - Manual (Page 48)

Using the Battery 39
2. Close the LCD panel, and turn the computer over so that
the bottom of the unit faces up.
3. Slide the battery compartment cover straight up and off
the computer (Figure 17).
Figure 17. Removing the Battery Pack
4. Grasp the plastic tab on the battery and pull the battery
out of the compartment.
To reinstall the battery pack:
1. Turn the computer’s power off.
2. Close the LCD panel and turn the computer over so the
bottom of the unit faces up.
3. Slide the battery pack into the compartment. Make sure
the battery is fully inserted into the compartment.
4. Align the tabs on the battery compartment cover with the
slots on the battery compartment.
5. Push the cover straight down until it snaps into place.
Bottom of
computer
Tab
Tab
3754-1.bk : 3754-2.fm Page 39 Wednesday, July 30, 1997 2:33 PM