Kensington M Series - Manual (Page 65)

56 Ascentia M Series User’s Manual
Exit Menu
Select Exit from the menu bar to display the Exit menu.
Pressing <Esc> does not exit this menu. You
must select one of the options from this menu or
a menu bar item to exit this menu.
Discard Changes & Exit: Exits System Setup without saving
your changes. When you select this item and press <Enter>, a
message appears asking you if you want to save your changes.
Choose No to leave the program without saving your changes.
Choose Yes to save your changes.
Save Changes & Exit: Exits System Setup and saves your
changes. When you select this item and press <Enter> a message
appears telling you that changes have been saved. Press <Enter>
again to exit System Setup.
Get Default Values: Loads the default values for all System
Setup parameters. When you select this option and press
<Enter>, a message appears telling you that the default values
have been loaded. You can now select Save Changes & Exit or
make other changes before exiting System Setup.
Load Previous Values: Enables you to discard the selections you
have made and restore the values you previously saved. When
you select this option and press <Enter>, a message appears
telling you that the previous values have been loaded. You can
now select Save Changes & Exit or make other changes before
exiting System Setup.
Save Changes: Saves your selections without exiting System
Setup. When you select this option and press <Enter>, a message
appears telling you that the changes have been saved. You can
now select Save Changes & Exit or make other changes before
exiting System Setup.
3754-1.bk : 3754-3.fm Page 56 Wednesday, July 30, 1997 2:33 PM