Kensington M Series - Manual (Page 72)

Using Power Management Options 63
•
Do not try to resume to full-power mode using battery
power if the battery charge is low. If the battery charge is
too low, the system may not be able to resume fully. Plug
in the AC adapter if your computer cannot resume
normal operation because of a low battery charge.
When your computer is in power on suspend or
save to disk mode, do not connect or remove
any devices (including PC Cards or memory
modules) because you may damage the
computer or resume to full power may fail. If a
floppy disk is in the floppy drive, do not remove
it or switch it with another disk.
However, you can plug in the AC adapter if the
resume to full power fails because of a low
battery charge.
When the computer is in save to disk mode, you
can remove and replace the battery.
3754-1.bk : 3754-3.fm Page 63 Wednesday, July 30, 1997 2:33 PM