Kensington M Series - Manual (Page 99)

90 Ascentia M Series User’s Manual
Figure 23. Removing a Memory Module
b. Hold the memory module by the edges and pull it
forward out of the compartment.
5. Align the connector on the memory module with the
connector of the slot.
6. Push the memory module into the slot at a slight angle
until the connectors are fully engaged (Figure 24).
7. Push down on the edge of the memory module until the
module snaps into place.
Tabs
3754-1.bk : 3754-3.fm Page 90 Wednesday, July 30, 1997 2:33 PM