Kensington M Series - Manual (Page 98)

Using Options 89
Figure 22. Removing the Memory Module Compartment Door
3. Grasp the edge of the door and pull the door off the
chassis.
4. Remove installed modules if necessary:
When removing modules, pull on the plastic
portion of the connector slots tabs only. Do not
pull on the metal part of the tabs, or you may
damage the tabs.
a. Pull the tabs on the connector slot outward
slightly, until the edge of the memory module
pops up (Figure 23).
3754-1.bk : 3754-3.fm Page 89 Wednesday, July 30, 1997 2:33 PM