Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER - Manual (Page 32)

Connections Using CAN Link
The Evolution Two brings a new convenience to the operation of monaural pream-
plifiers, using a sophisticated, reliable control system called a controller area net-
work (CAN) . Using CAN Link, any number of preamplifier channels may be linked
for multichannel playback. CAN Link enables all linked preamplifier channels to be
controlled from any single linked preamplifier channel in the system.
To Connect Multiple Evolution Two
Preamplifiers via CAN Link:
After the power supply chassis is connected to the preamplifier chassis with the
12-pin DC cable:
1. Connect one RJ-45 connector from either CAN Link connector (45) on the
back panel of any preamplifier chassis (1) to either CAN Link connector on any
other preamplifier chassis. The two preamplifier channels that are connected
are now linked.
2. Repeat Step 1 for each additional preamplifier channel you want to link. For
more information on linked preamplifier channels, see Appendix: CAN Link
and Multiple Evolution Two Preamplifiers, on page 51.
(SECTION FIVE: Connecting the Evolution Two to Your System continued)
28