Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER - Manual (Page 40)

CLONE BEGIN
Sends the message that a clone is about to begin, from the clone transmitter to
the clone receiver(s).
CLONE TRANSMIT
Once the clone begin message is sent, the clone transmitter display reads: CLONE
TRANSMIT, indicating that the preamplifier is ready to transmit the clone data.
CLONE RECEIVE
Once the clone begin message is sent, the clone receiver(s) display reads: CLONE
RECEIVE, indicating that the preamplifier(s) is(are) ready to receive the clone data.
Note
In order to set a clone receiver to ignore the clone, use the level control knob on the clone
receiver front panel to scroll to CLONE IGNORE .
Display
This function enables you to turn on the front panel display (15) all the time, or
turn it off after a time out. The options are: ON , TIMED.
Enter the menu, then:
1. Use the level control knob on the preamplifier chassis front panel or the up and
down keys on the remote control (16) to select: DISPLAY.
2. Press the enter button on the preamplifier chassis front panel or the enter key
(18) on the remote control . The front panel display (15) reads: MODE.
3. Press the enter button or key (18) again . The front panel display shows the
default mode: ON .
4. Use the level control knob or the up and down keys to select the desired
option: ON or TIMED .
5. Press the enter button or key to confirm the selection. The front panel display
reads: MODE.
6. Use the level control knob or the up and down keys to select: BRIGHTNESS .
7. Press the enter button or key . The front panel display shows the default mode:
HIGH .
8. Use the level control knob or the up and down keys to select the desired
brightness: OFF, LOW (25%), MED (50%), or HIGH (100%) .
9. Press the enter button or key to confirm the selection. The front panel display
reads: BRIGHTNESS.
36
(SECTION SEVEN: Customizing the Evolution Two continued)
17 Menu Button or Key
Enter or exit the menu.
16 Volume Knob
or Level Keys
Navigate the menu hierarchy,
review functions and configu-
ration options.
18 Enter Button or Key
Select a configuration option
or confirm a selection.
BACK
Scroll up the menu hierarchy,
or exit a menu option without
confirming it.