Kyocera Jet KX18 - Manual (Page 17)

PAGE 9 | MAKING A CALL | MAKING AND ANSWERING CALLS
2 MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can be received. Look for the symbol on the home
screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to
where the signal strength is better.
When the phone has been idle for a time, it changes to power save mode. Press any key to return to
normal operating mode.
Slide open
1. Enter the phone number and press the
Send/Talk key
.
2. Press the End/Power key or close slide
(if “Close to End” is enabled. See “Ending
calls using the slide” on this page).
Slide closed
You can select a contact from your Contacts list
or use the voice dialing feature to initiate a call
with the slide closed. See “Creating a voice tag
for a contact” on page 80.
Voice dialing for a contact with a voice tag:
1. From the home screen, press the Send/Talk
key
to initiate voice dialing.
2. Say the name of the contact when
prompted. The phone places the call.
3. When finished, press End/Power key .
Voice dialing a number without a voice tag:
1. From the home screen, press the Send/Talk
key
to initiate voice dialing.
2. Say the word “dial.”
3. Speak the phone number one digit
at a time.
4. The phone places the call. When finished,
press End/Power key
once.
5. For complete Voice dialing instructions, see
page 80.
Ending calls using the slide
You can set the phone to end calls immediately
when you close the slide.
• Select Menu → Settings →
Convenience → Close to End → Enabled.
• Select Disabled to have the phone call
continue when you close the slide.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact
name appears.