Kyocera Jet KX18 - Manual (Page 90)

PAGE 82 | MAKING A CALL USING DIGIT DIALING | USING VOICE RECOGNITION
To activate the Voice Wake-up setting:
1. Select Menu
→
Settings
→
Voice
Features
→
Voice Wake-Up
→
With accessory.
2. Select Menu
→
Settings
→
Keyguard
→
Disabled, then press the Amp’d/OK key .
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear
two tones.
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page 83
.
Answering the phone
You can set your hands-free car kit to
(1) answer automatically or (2) answer using
a voice command.
Answering automatically
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free car kit.
• Select Menu
→ Settings →
Accessories
→ Auto-Answer →
After 5 secs.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
• Select Menu
→ Settings →
Accessories
→ Auto-Answer → Disabled.
To activate the Voice Answer setting:
1. Select Menu
→
Settings
→
Voice Features
→
Voice Answer.
2. Highlight Enabled and press the
Amp’d/OK key
.
3. Select Menu
→
Settings
→
Silent Mode
→
Normal Sounds, then
press the Amp’d/OK key .
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or
“Incoming roam call, answer?” If the caller is
recognized as a contact entry in your phone,
then the phone will say “Incoming call from
(Name), answer?”
• Say “Yes” or press any key except the
End/Power key
.
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
• Say “No” and press the End/Power key
to silence the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to
the home screen.