Kyocera Jet KX18 - Manual (Page 56)

PAGE 48 | SAVING, EDITING, AND ERASING PTT CONTACTS | USING PUSH TO TALK
• If the other party refused your invitation
or did not respond within a 3-minute
period, “Contact Name Not
Added” appears.
Note: The other party cannot receive or
respond to your invitation if their
phone is off or if they are outside of
the service area.
7. If “Contact Name Not Added” appears,
press the left softkey
to select OK and
return to the PTT menu.
Erasing a PTT contact
1. Select Menu → Push to Talk →
PTT Contacts. Highlight the PTT contact
name you wish to erase.
2. Press the right softkey to select Options.
3. Press the Navigation key down to select
Erase Contact.
4. Press the left softkey select Yes, or press
the right softkey to select No.
5. To erase additional contacts, press the
Navigation key
up or down and select
their names and repeat the process above.
Checking your contacts’ availability
In the Recent Calls lists and the PTT menus, icons
appear next to PTT contact and group names to
show their availability to participate in a call.
Contact Available—The contact (or one
member of the group) can accept calls.
Do Not Disturb—PTT calls cannot be
made to the contact (or any member of
the group).
Contact Unavailable—A dim PTT icon
means the handset is turned off, or the
contact is not registered with the voice
network.
Group Member is in pending (originator or
terminator)
Contact is in pending (originator or
terminator)
Group Member is in state unknown
(awaiting server update)
Contact is in state unknown (awaiting
server update)
Group is available
Group is not available
Group is set to Do Not Disturb, all users in
the group have presence of Do Not Disturb
Group is Pending
Group member state is unknown