Kyocera Jet KX18 - Manual (Page 22)

PAGE 14 | SETTING UP VOICEMAIL | MAKING AND ANSWERING CALLS
If you see “New Messages” or “New Alerts”
Slide open or closed
1. Press the left softkey to select Call,
which initiates a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
To clear the screen without
checking messages:
1. Press the right softkey to select Options.
2. Select Ignore to clear the screen.
3. Select Calls to view information about
the calls.
If you see only the symbol
Slide open
1. Press and hold the “1” key to initiate a
call to your voicemail number.
2. Follow the prompts to retrieve the message.
• You can set the phone to beep or vibrate
every five minutes to remind you that you
have voicemail. See “Setting message
alerts” on page 55.
Slide closed
1. Select Menu → Messages → Voicemail.
2. Press the left softkey to retrieve
your voicemail.
Calling emergency services
Note: Regardless of your 3-digit emergency
code (911, 111, 999, 000, etc.), your
phone operates as described below.
• Dial your 3-digit emergency code and
press the Send/Talk key
.
You can call the code even if your phone is
locked or your account is restricted. When you
call, your phone enters Emergency mode. This
enables the emergency service exclusive access
to your phone to call you back, if necessary. To
make or receive regular calls after dialing the
code, you must exit this mode.
To exit Emergency mode
When you have completed the emergency call:
1. Press the Amp’d/OK key to select Exit.
2. Press the Amp’d/OK key again to
confirm your choice.
Note: To determine who has access to your
location, see “Setting position location”
on page 60.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu → Recent Calls.
2. Select a timer:
• Recent Calls Timer tracks all calls you
have made and received since you last
reset this timer. To reset this timer to
zero, press the right softkey
to
select Reset.
• All Calls Timer tracks all calls you have
made and received. This timer cannot
be reset.