Kyocera Jet KX18 - Manual (Page 88)

PAGE 80 | SETTING UP VOICE DIALING | USING VOICE RECOGNITION
14 USING VOICE RECOGNITION
Voice recognition allows you to make and answer calls by speaking commands into the
phone’s microphone.
Note: You cannot use voice recognition to end a call; you must press the End/Power key when the
slide is open.
Setting up voice dialing
To make or receive calls using voice dialing,
contacts must be saved with associated
voice tags.
Creating a voice tag for a contact
1. Press the right softkey to
select Contacts.
2. Highlight the contact and press the
Amp’d/OK key
.
3. Press the Navigation key down to
highlight the number.
4. Press the right softkey to select Options.
5. Highlight Add Voice Dial and press the
Amp’d/OK key
.
6. Follow the voice prompts. You will need to
say the name twice.
Viewing entries with voice tags
• Select Menu
→ Contacts →
Voice Dial List.
A list of all contacts with assigned voice
tags appears.
Editing a voice tag
1. Select Menu
→
Contacts
→
Voice Dial List.
2. Highlight the contact to edit, and press the
Amp’d/OK key
.
3. Highlight the phone number and
select Options.
4. Select Add Voice Dial, Edit Voice Dial, or
Erase Voice Dial.
5. Follow the prompts.
Making a call using voice tags
1. If you haven’t already done so, record a
voice tag for the person you wish to call.
2. With the slide open or closed, from
the home screen, press the Send/Talk
key
. The message: “Say a name or
‘Dial.’” displays
3. Say the name of the person you want
to call.
4. If the name you said matches a contact in
the Voice Dial List, the phone responds:
“Calling (Name).” Remain silent to make the
call, or say No to cancel.