Kenwood DIGITAL MEDIA RECEIVER KIV-700 - Manual (Page 31)

English |
31
Make a Voice Dialing Call
1
Enter voice recognition mode
Press the [VOL] button for at least 1 second.
2
“Phonebook Name?” is displayed.
When a beep is heard, say the name within 2
seconds.
3
“Phonebook Type?” is displayed.
When a beep is heard, say the category name
within 2 seconds.
4
Make a call
Press the [Volume] knob.
✍ This step is the same as step 4 of the procedure
in
<Calling a Number in the Phone Book> (page
30) . You can make a call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [Volume] knob allows you to retry
voice input. Refer to
<Troubleshooting Guide> (page 72) .
• Both the name and category require registration of
a voice tag. Refer to <Setting a Voice Command for
Category> (page 55) .
• Audio sound is not output during voice recognition.
Registering to the Preset Dial Number
List
1
Select the phone number you wish to register
Select the phone number with reference to the
following:
- Calling a Number in the Phone Book (page 30)
- Calling a Number in the Call log (page 30)
- Dial a Number (page 30)
2
Enter Preset Memory mode
Press the [Volume] knob for at least 2 seconds.
3
Select the preset number to put in the
memory
Turn the [Volume] knob.
Select the preset number.
4
Determine the preset number to put in the
memory
Press the [Volume] knob for at least 2 seconds.
Exit the Preset Memory mode
Press the [MENU] button.
Display of Phone Number Type
(category)
The category items in the Phone Book are displayed
as follows:
Display Information
“General” / “ ” General
“Home” / “ ” Home
“Office” / “ ” Office
“Mobile” / “ ” Mobile
“Other” / “ ” Other