Kenwood DIGITAL MEDIA RECEIVER KIV-700 - Manual (Page 39)

English |
39
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1
Turn the power ON.
2
Do the step 4 through 5 operation, and enter
the Security Code.
“Approved” is displayed.
Now, you can use the unit.
Deactivating Security Code
To deactivate the Security Code function.
1
Select the Standby
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Select the “STANDBY” display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Security Code mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings”
> “Security Clear”.
When “Enter” is displayed, “– – – –” is also displayed.
4
Enter Security Code
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
5
Press the Control knob for at least 2 seconds.
“Clear” is displayed.
The Security Code function deactivates.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.