Kenwood DIGITAL MEDIA RECEIVER KIV-700 - Manual (Page 55)

English |
55
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter Bluetooth mode
Press the [TI] button for at least 1 second.
2
Enter Phone Number type edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings”
> “Voice Tag” >
“Phonebook Type Edit”.
3
Select the category (type) you wish to set
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “General”, “Home”, “Office”, “Mobile”, or
“Other”.
4
Select a mode
Turn the [Volume] knob.
Display Operation
“Phonebook Type Registration” Register a voice tag.
“Phonebook Type Check”* Play a voice tag.
“Phonebook Type Delete”* Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
5
Register the category (type) by performing
steps 5 to 7 in
<Adding a Voice Dialing
Command> (page 54) .
6
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phone book
may not be recalled by voice command.