Kenwood DIGITAL MEDIA RECEIVER KIV-700 - Manual (Page 37)

English |
37
Initial Settings
You can select following Initial Setting items.
1
Select the Standby
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Select the “STANDBY” display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Initial Setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings”.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Display Overview
“Initial Settings”
“Security Set” Sets/Resets security code.
- Activating Security Code (page 38)
- Deactivating Security Code (page 39)
“Security Clear”
“Source Select” Sets the source selection method.
“1”/ “2”
“Beep” Setting the operation check sound (beep sound)
ON/OFF.
“ON”/ “OFF”
“Russian” When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist
name/ Album name/ KCA-BT300/BT200
(optional accessory)
“ON”/ “OFF”
“Menu Language
Select”
You can select the display language for the
Menu list item.
“English”/ “Français”/ “Español”/ “Deutsch”/
“Italiano”/ “Pyccкий”
“Power OFF Wait” Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
“-----”/: Power OFF Timer function is OFF.
“20min”/ “40min”/ “60min”: Turns the power
OFF after minutes.
“Built in AUX” When this is set to ON, AUX source can be
selected.
“ON”: Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
“OFF”: Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
“Favorite Delete” Deletes Favorite Preset Memory.
Refer to <Favorite Preset Memory Delete>
(page 49) .
“Built in AMP” Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
“ON”/ “OFF”
“AV Out Set” Changes the iPod setting from AV Output to
output-only terminal.
“ON”/ “OFF”
“System F/W
Update”
Updates the firmware. The update information
will be posted on the following URL as
necessary.
www.kenwood.com/cs/ce/
( : Factory setting)
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.