KORG Ax3000g - Manual (Page 13)

Introduction
Panel Tour
Setup
Playing
Creating
and Storing
Effect Type
Pedals
ESS
Index
MIDI/DIGITAL
Factory settings
Trouble- shooting
Spec.
Tuner
Appendix
7
4.2 √ √ √ √ /® ® ® ® buttons
Use these to select the parameter you want to edit, or to edit the program
name.
4.3 Name display
Displays program names, effect names, or parameter names.
4.4 Value display
This indicates the value of the parameter you are editing. If the displayed
parameter value matches the unedited value (i.e., the value that’s stored in the
program), the Original Value icon
will light. If the name display shows the
program name, and the program name or BANK LED are not blinking, the
bank number and program number are shown in the form of “2-1” (which in this
example indicates bank 2, program 1).
4.5 OUTPUT icon
This indicates the AX3000G’s output destination setting (AMP/LINE).
4.6 CABINET icon
This will light when the Cabinet model is active.
4.7 EXP icon
This will light when the expression pedal can be used.
4.8 Quick Assign icon
This will light if you’re operating a parameter that can be assigned to the
expression pedal, indicating that the Quick Assign function is available.
B
ANK DISPLAY
5.1 Bank display
This indicates the bank number. If the Tuner is operating, it indicates the note
name (p.21).
5
5.1