D. mod (modulation) effects, D. mod (m, Odulation – KORG Ax3000g User Manual

Page 36: Effects, Classic chorus (cl chors), Multi tap chorus (mt chors), Classic flanger (cl flang)

Advertising
background image

30

D. MOD (M

ODULATION

)

EFFECTS

Here you can select one of 11 modulation-type effects.

*: This indicates a parameter that you can control from the expression pedal.

1. CLASSIC CHORUS (CL CHORS)

This models a chorus unit that has two modes (chorus and vibrato), and is best-
known for being built into a guitar amp.

2. MULTI TAP CHORUS (MT CHORS)

This is a chorus with independent taps for left/center/right, adding depth and spa-
ciousness to your sound.

3. CLASSIC FLANGER (CL FLANG)

A model of a truly classic analogue flanger that “unchained” a highly influential
modern guitarist who many hail as the “godfather of two handed tapping.”

[1] “DEPTH”

0.0–10.0

* Adjusts the modulation depth.

[2] “SPEED”

0.1–10.0[Hz]

* Adjusts the modulation speed.

[3] “MANUAL”

1.0–10.0

* Adjusts the center frequency of the sweep.

If DEPTH is set to 10, MANUAL will not func-
tion.

[5] “MODE”

1, 2, 3

Selects the output mode.

1: Mono output.
2: Stereo mode in which the effect is panned

right, and the dry sound panned left.

3: Vibrato mode, in which only the effected

sound is output. Setting MANUAL to 10 will
minimize the delay of the output.

[1] “DEPTH”

0.0–10.0

* Adjusts the modulation depth.

[2] “SPEED”

0.1–10.0[Hz]

* Adjusts the modulation speed.

[3] “TIME”

0.0–10.0

Adjusts the delay time.

[5] “MIX”

0.0–10.0

* Adjusts the mix level of the effect.

[1] “DEPTH”

0.0–10.0

* Adjusts the modulation depth.

[2] “SPEED”

0.1–10.0[Hz]

* Adjusts the modulation speed.

[3] “MANUAL”

1.0–10.0

* Adjusts the center frequency of the sweep. If

DEPTH is set to 10, MANUAL will not func-
tion.

[4] “RESO”

0.0–10.0

* Adjusts the amount of resonance.

[5] “MIX”

0.0–10.0

* Adjusts the mix amount of the effect.

CONTROL switch

FLN TRIG

If you set the FLN TRIG: CONTROL switch
setting to “FLN TRIG,” the LFO will be reset
to the position specified by OFFSET when-
ever you operate the switch. (p.43 Control
switch settings)

Advertising