KORG Ax3000g - Manual (Page 19)

Introduction
Panel Tour
Setup
Playing
Creating
and Storing
Effect Type
Pedals
ESS
Index
MIDI/DIGITAL
Factory settings
Trouble- shooting
Spec.
Tuner
Appendix
13
NOTE: If you want to use headphones, plug them into the PHONES jack. If you do,
signal from the OUTPUT jack(s) will no longer be heard.
2. Turn the LEVEL knob located on the rear panel of AX3000G all the way toward
the left (as seen from the rear), setting the volume to 0.
3. Plug your guitar into the rear panel INPUT jack.
4. Connect the included AC adapter to the rear panel DC9V power supply jack,
and then connect the plug to an AC outlet.
5. To adjust the volume, turn up your amp or mixer and the AX3000G’s rear panel
LEVEL knob to a desired level.
NOTE: Use the GLOBAL menu setting “DOUT LVL” to adjust the S/P DIF OUT out-
put level.
E XAMPLE OF CONNECTION TO A GUITAR AMP ( OR AMPS )
• If you want to connect the AX3000G to your guitar amps, connect the OUTPUT
L/MONO and R jacks to the inputs of your amps. Be sure to select the appropri-
ate connection (p.12).
HINT: If you’re connecting the AX3000G directly before your combo amp or head,
set the rear panel LEVEL knob to the maximum position.
INPUT
AX3000G
R
OUTPUT
L/MONO
LINE/AMP
SEND RETURN PHONES
External effect processor
to your mixer/recorder
or guitar amp
Headphones
Monaural phone
jack INPUT
Guitar to your MIDI
sequencer/computer
R
OUTPUT
L/MONO
AX3000G
INPUT
Guitar
INPUT INPUT
Monaural
phone jack
Monaural
phone jack
Guitar amp(s)
Monaural phone jack