KORG Ax3000g - Manual (Page 22)

16
O
PERATIONS IN
I
NDIVIDUAL MODE
As an example, here’s how to switch the pre-effect and reverb on/off while you’re
playing.
1. If the Bank Up switch LED is dark, you’re in Program Select mode. Press and
hold the Bank Up switch for about one second; you’ll enter Individual mode,
and the LED above the Bank Up switch will light green. Program LEDs 1–4 and
the LED at the upper left of the Bank Down switch will be lit green or dark to
indicate the on/off status of the pre-effect, drive/amp model, modulation effect,
delay effect, and reverb effect respectively.
2. Press the program select switch 1 to turn the pre-effect on/off. The LED 1 lit/
dark state indicates the on/off status of the pre-effect.
3. Press the Bank Down switch to turn the reverb on/off. The LED at the upper left
of the Bank Down switch will be lit or dark to indicate the reverb’s on/off state.
4. To exit Individual mode, press the Bank Up switch and the green LED will go
dark (not lit)
A
CTIVATING OR DEACTIVATING THE
K
EY
L
OCK FUNCTION
Here’s how you can use the Key Lock function to disable the AX3000G’s buttons,
selectors, and knobs so they can’t be accidentally changed during a live perfor-
mance.
NOTE: While the Key Lock function is activated, you won’t be able to operate any
controls except for the switches, pedals and the EXIT button.
NOTE: The Key Lock setting is cancelled when you turn off the power; it will be dis-
abled when you turn on the power once again.
A CTIVATING THE K EY L OCK FUNCTION
1. If the name display shows anything other than a program name, or if the char-
acters of the program name are blinking, press the EXIT button.
2. With the program name shown in the name display, press and hold the EXIT
button for at least one second.
The name display will indicate KEY LOCK for one second, and then the value
knob LEDs will go dark.
D EACTIVATING THE K EY L OCK FUNCTION
1. If the name display shows anything other than a program name, press the
EXIT button.
2. Press and hold the EXIT button for at least one second.
The name display will indicate “LOCK OFF” for one second, and the Key Lock
function will be disabled.