KORG OASYS musical instruments - Manual (Page 76)

Playing and editing Combinations
68
Combination structure and corresponding pages
Selecting Combinations
There are several different ways to select
Combinations. Each one is convenient in a different
way:
• Using the front-panel buttons, value slider, and
value knob, you can select Combinations quickly
via physical controls
• Selecting by Bank and number (via the touch-
screen) lets you browse through all of the
Combinations in memory, to find the one that you
want
• Selecting by Combination category (via the touch-
screen) lets you filter Combinations by sound type,
such as Pianos or Drums
• Using a foot-switch lets you change Combinations
even while both hands are busy playing on the
keyboard - convenient for live applications
• MIDI program change messages let you select
Combinations remotely, from either -a MIDI
sequencer or an external MIDI controller
Using the front-panel buttons
1. Make sure that the COMBI button, under MODE,
is lit.
This means that you’re in Combination mode, in which
you can select and edit Combinations. If the button
isn’t lit, press it now; it will light up, and the main
Combination Play page will appear.
2. If you’re already in Combination mode, go to the
main Combination Play page.
The main Play page shows the selected Program,
status, pan, and volume for timbres 1-16.
3. Make sure that the Combination name is selected.
If it is not selected, go to the Combination P0: Play
page and touch the Combination’s name, so that it’s
hilighted.
4. Use the VALUE controllers to select the
Combination number that you wish to play.
You can use the following methods to select a
Combination.
• Turn the Value dial.
• Press the Inc or Dec buttons.
• Use the numeric keypad [0]–[9] to specify the
number, and press the ENTER key.
5. Press a BANK button (INT or USER A-G) to
switch banks.
When you select a different Bank, the button’s LED
will light, and the selected bank will appear on the
upper left side of the LCD screen.
For example to select bank INT-B, press the B button in
the top row of Bank buttons. The B button will light,
and the name INT-B will appear in the upper left of the
LCD screen.
Selecting by Bank and number
You can select Combinations from a list organized by
Combination bank.
1. Press the Combination Select popup button.
The Bank/Combination Select dialog appears.
Parameters
Parameters
Parameters
Parameters Timbre2
Timbre3
Timbre16
Timbre4
Timbre1 Parameters
Program
Program
Program
Program
Program
P1–1, P2–2, etc. indicate the OASYS on-screen pages and tabs.
AUDIO OUTPUT
INDIVIDUAL 1...8
AUDIO OUTPUT
L/MONO, R
Master
Effects
1, 2: P9
Total
Effects
1,2: P9 Insert
Effects
1…12: P8
Controllers: P1 - 8
Pads: P1 - 9
Vector: P1 - 5, 6, 7
KARMA: P7
Timbre
Insert Effects
Master Effects
Individual Outputs
REC Bus
FX Control Bus
Routing: P8-1, 2
Audio Input: P0 - 8
Tone Adjust: P0 - 9
3Band EQ
3Band EQ
3Band EQ
3Band EQ
3Band EQ