Kenwood KRF-V8010D - Manual (Page 12)

12
Preparations
KRF-V8010D (En/T)
SUBWOOFER SURROUND
PRE OUT
CENTER
L
R
CENTER SPEAKER FRONT SPEAKERS
+ +
- -
R
A
L C
SURROUND SPEAKERS
FRONT SPEAKERS
L R
+ + - -
+ + - -
L R
B
1 Strip coating. 2 Loosen.
3 Insert. 4 Secure.
Connecting the speakers
Right
Front Speakers A
Left Right
Use the FRONT
SPEAKERS B
terminals if you
want to connect a
second front
speaker system.
Left
(Be sure to connect both
surround speakers)
Center Speaker
Surround Speakers
Powered
subwoofer
Speaker impedance
FRONT SPEAKERS A or B ....................................................... 4-16
Ω
FRONT SPEAKERS A and B .................................................... 8-16
Ω
CENTER SPEAKER .................................................................... 4-8
Ω
SURROUND SPEAKERS ............................................................ 4-8
Ω
Setting up the system
PRE OUT connections
This receiver has additional preout jacks. These can be used for
various purposes, but will need to be connected to an external power
amplifier as shown in the example below.
• Connecting a speaker cord directly to a PRE OUT jack will not
produce any sound from the speaker.
• To use the PRE OUT jacks, press the SPEAKERS A key to the on
position.
Power amplifier Surround
Speakers
Powered
Subwoofer
Center Speaker
Power amplifier
SUBWOOFER SURROUND
PRE OUT
CENTER
L
R
Speaker impedance
FRONT SPEAKERS .................................................................. 8-16 Ω
CENTER SPEAKER .................................................................. 8-16 Ω
SURROUND SPEAKERS .......................................................... 8-16 Ω
for Australia only