Kenwood KRF-V8010D - Manual (Page 28)

28
Other
KRF-V8010D (En/T)
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your
dealer for information or service on this product.
Model __________________ Serial Number _______________________
AUDIO section
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven, at
8
Ω
from 40 Hz to 20 kHz with no more than 0.7% total harmonic
distortion.(FTC)
Effective power output during SURROUND operation
FRONT (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................. 100 W + 100 W
CENTER (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
............................................................................................. 100 W
SURROUND (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
.............................................................................. 100 W + 100 W
Total harmonic distortion ........................... 0.03% (1 kHz, 50W, 8
Ω
)
Signal to noise ratio
PHONO (MM) ......................................................... 75 dB (IHF'66)
CD .......................................................................... 91 dB (IHF'66)
Input sensitivity / impedance
PHONO (MM) ......................................................... 2.5 mV / 27 k
Ω
CD ......................................................................... 200 mV / 47 k
Ω
DVD 6CH (SUBWOOFER) ................................... 200 mV / 10 k
Ω
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 k
Ω
PRE OUT (CENTER, SURROUND) .............................. 1 V / 1 k Ω
PRE OUT (SUBWOOFER) .......................................... 1 V / 600 Ω
Tone control
BASS .............................................................. ±10 dB (at 100 Hz)
TREBLE .......................................................... ±10 dB (at 10 kHz)
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ............................................ 1 Vp-p / 75
Ω
FM tuner section
Tuning frequency range ................................... 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN, 75
Ω
)
MONO .................... 1.6 µV / 15.2 dBf (75 kHz DEV., S/N 30 dB)
STEREO .............. 31.6 µV / 41.2 dBf (75 kHz DEV., S/N 30 dB)
Total harmonic distortion (DIN, 1 kHz)
MONO ............................................................ 0.6% (65 dBf input)
STEREO ........................................................ 0.7% (65 dBf input)
Signal to noise ratio (DIN weighted, 1 kHz)
U.K. and Europe
MONO .......................................................... 75 dB (75 kHz DEV.)
STEREO ...................................................... 68 dB (75 kHz DEV.)
Stereo separation (DIN, 1 kHz) .................................................. 38 dB
Selectivity (DIN, ±400 kHz) ........................................................ 50 dB
Frequency response (30 Hz ~ 15kHz) .................. +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB)
........................................................................ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod., 1 mV input) .......................... 50 dB
GENERAL
Power consumption .................................................................. 250 W
AC outlet
SWITCHED ........................................................... 1 (150 W max.)
Dimensions ...................................................................... W : 440 mm
H : 144 mm
D : 400 mm
Weight (Net) ............................................................................... 9.7 kg
For Australia
Specifications
Caution : Read this page carefully to ensure safe
operation.