Kenwood KRF-V8010D - Manual (Page 7)

7
Preparations
KRF-V8010D (En/T)
AC 220 -
240V AC 110 -
120V AC 220 -
240V AC 110 -
120V
REC OUT
PHONO CD MD / TAPE MONITOR
PLAY IN REC OUT PLAY IN
L
R
Make connections as shown below.
When connecting the related system components, be sure
to also refer to the instruction manuals supplied with the
components you are connecting.
Do not connect the power cord to a wall outlet until all
connections are completed.
Microcomputer malfunction
If operation is not possible or an erroneous display appears, even
though all connections have been made properly, reset the micro-
computer referring to “In case of difficulty”.
§
Notes
1. Connect all cords firmly. Loose connections may prevent proper
sound transmission or produce noise.
2. Be sure to remove the power cord from the AC outlet before plugging
or unplugging any connection cords. Plugging / unplugging connec-
tion cords without disconnecting the power cord can cause malfunc-
tions and may damage the unit.
3. Do not connect power cords from components whose power con-
sumption is larger than what is indicated on the AC outlet at the rear
of this unit.
Connecting audio components
To AC wall outlet
Cassette deck or
MD recorder
CD player
IN OUT
Record player
SYSTEM CONTROL
jacks
!
Shape of AC outlets
Other countries
Cassette deck or
graphic equalizer
&
Setting up the system
To maintain proper ventilation, be sure to leave a space around the
unit (from the largest outer dimensions, including projections) equal
to, or greater than shown below:
Left and right panels: 10 cm, Rear panel: 10 cm, Top panel: 50 cm
IN
OUT
OUT
OUT
Australia
x2
x1
Caution regarding placement
For U.K.
x2