Kenwood KRF-V8010D - Manual (Page 22)

22
Operations
KRF-V8010D (En/T)
1 Hold down the TA/NEWS key for more than two seconds so that
the “TI.VOL” indicator starts blinking.
2 Use the VOLUME CONTROL knob to select the desired volume
level.
Proceed to next step within five seconds.
3 Press the TA/NEWS key to enter the new setting.
• The “ TI.VOL ” indicator stops blinking and remains lit.
• This function is not valid when the set volume is lower than the
original volume.
Setting the volume while receiving information (TI volume)
If you preset the volume level, you can listen to the information of your
choice at that volume level automatically. After the information has
been received, the volume returns to the previous level.
Canceling TI volume
Hold down the TA/NEWS key for more than two seconds so that
the “TI.VOL” indicator goes off.
Blinks
TI -5 dB ) FM
AM
kHz
MHz STEREO
DSP
S.DIRECT
A SP
MUTE MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R L DIGITAL B TI.VOL
RDS EON PTY
TP TA NEWS
Listening to radio broadcasts