Kenwood KRF-V8010D - Manual (Page 24)

24
Operations
KRF-V8010D (En/T)
VIDEO3
A SP
TUNED
MEMO.
AUTO
ST.
AUTO SOUND C
RS
R
LS
L
LFE
DIGITAL B
Surround Play
DOLBY DIGITAL can be used when playing DVD or LD software
bearing the mark and DOLBY DIGITAL (AC-3) format digital
broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be
used when playing video, DVD, or LD software bearing the
mark.
• Turn ON related components.
• Complete "Preparing for surround sound".
$
• Set the INPUT SELECTOR to the component you wish to play back
with surround sound.
• Use the INPUT MODE key to select the input mode (analog or
digital) for the source you wish to play back. 9
Preparations
1
2
Start playing the video software.
Press the LISTEN MODE key to select the listening mode.
The listening mode settings are stored separately for each input. If
the input mode is set to digital auto ("AUTO SOUND" lights), the
receiver selects the optimal listening mode automatically based on
the type of input signal and the speaker settings.
Each press of the LISTEN MODE key switches the setting as
listed below.
Note that the only listening mode settings that can be used for
playback with the current input signal type and speaker settings
are available.
• DOLBY DIGITAL (AC-3)
• DOLBY PRO LOGIC
• DOLBY 3 STEREO
• STEREO
Example with the DOLBY PRO LOGIC mode selected
The channels from which sound will issue are displayed.
Adjust the volume.
3
The source channel from
which the signal is being
input is displayed.
Example using a Dolby Digital source signal
Lights when the auto sound
function is activated.
1
2
3
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output channels
and the receiver, you can enjoy surround sound playback.
Preparations
Select “DVD 6ch” as the input source.
• If speaker system B is on when “DVD 6ch” is selected as the input
source, it switches off and speaker system A turns on automati-
cally.
Start playback of the DVD software.
Adjust the volume.
• It is not possible individually to adjust the volume level or sound
quality ( SETUP , SOUND ) of the separate channels when the
receiver is in the DVD 6ch mode. Adjust the volume with the
controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
• When in the DVD 6ch mode, you can still use the volume control,
mute, SPEAKERS (A) key, and dimmer functions.
• Connect your DVD player to the DVD 6ch jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”.
$
VIDEO
INPUT MODE
Ambience effects
PRO L GI O A SP
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
S
SW
C R L B
LISTEN MODE
INPUT MODE
LISTEN MODE
• If a Dolby Digital signal having more channels than the maximum
number of playback channels available using the receiver’s
current settings is input, the
DOWNMIX indicator lights on the
display and downmixing is performed to match the number of
available channels.
Example: If a Dolby Digital 5.1 signal is being input and the
receiver is set to the stereo mode or if the center
speaker channel is turned off.