KORG CX-3 - Manual (Page 14)

Basic operation
10
4. Try selecting other programs.
Use the [+] and [–] keys to select the bank, and the
PROGRAM [1]–[8] keys to select the number.
When you switch programs, the program parameters
other than the drawbar settings will be reflected in the
sound.
5. While you play, press the various keys of the
PERCUSSION section to add percussion.
When you add percussion to your performance, a
sense of attack will be added to the beginning of the
notes you play, producing a crisper sound.
For details on percussion settings, refer to “Percus-
sion” (p.11).
If you play the keyboard legato, the percussion will
be added only to the first note you play.
You can also add vibrato, chorus, or rotary speaker
effects to your playing. For details refer to “4.
Applying effects to your playing” (p.11).
Play using the drawbar parameter
settings of a program
Here’s how to play using the drawbar parameter settings
specified by the program.
Front panel Drawbar 1 and 2 cannot be used.
Normal mode
1. Select a program in Normal mode.
Use the [+] key and [–] key to select the bank, and the
PROGRAM [1]–[8] keys to select the number. For
details refer to “Selecting a program” (p.8).
2. In the DRAWBAR SELECT section, press the
UPPER [DRAWBAR PRESET] key to make the key
LED light.
Now you can play the Upper tone generator using
the parameter settings of the program you selected.
If the keyboard is not split, the Upper tone generator
will be used by the entire keyboard. In this case, the
selection you make for the Lower tone generator in
the DRAWBAR SELECT section will not affect the
sound you play from the CX-3’s keyboard.
3. Play the keyboard.
You will play the sound that is specified by the
“UPPER” parameters of the program.
4. If you wish to add percussion, make sure that the
Normal Edit mode Group 2 “DB Preset’s Perc”
parameter is set to Ena, and press the keys of the
PERCUSSION section.
If this parameter is set to Dis, pressing the keys of the
PERCUSSION section will have no effect.
For details on checking and setting this parameter,
and on using percussion, refer to “Percussion” (p.11).
If you play the keyboard legato, the percussion will
be added only to the first note you play.
You can also add vibrato, chorus, or rotary speaker
effects to your playing. For details refer to “4.
Applying effects to your playing” (p.11).
EX mode
1. Select a program in EX mode.
Use the [+] key and [–] key to select the bank, and the
PROGRAM [1]–[8] keys to select the number. For
details refer to “Selecting a program” (p.8).
2. In the DRAWBAR SELECT section, press the
UPPER [DRAWBAR PRESET] key to make the key
LED light.
Now you can play using the parameter settings of
the program you selected.
In EX mode, only the Upper tone generator is used;
the Lower tone generator cannot be selected.
3. Play the keyboard.
You will play the sound that is specified by the “EX
Mode Drawbar Level” parameters of the program.
4. You can add percussion by pressing the keys of
the PERCUSSION section.
For details on percussion settings, refer to “Percus-
sion” (p.11).
You can also add vibrato, chorus, or rotary speaker
effects to your playing. For details refer to “4.
Applying effects to your playing” (p.11).