KORG CX-3 - Manual (Page 29)

Parameters
25
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Group 6
CC# Expression (MIDI Control Change Assign for
Expression)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the [EX-
PRESSION/OVERDRIVE] knob. (The factory setting
is 11.)
CC# Rotary On (MIDI Control Change Assign for
Rotary ON/OFF)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the RO-
TARY section [ON] key. (The factory setting is 81.)
CC# Rotary Fast (MIDI Control Change Assign for
FAST/SLOW)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the RO-
TARY section [FAST] key. (The factory setting is 82.)
CC# Rotary Stop (MIDI Control Change Assign for
Rotary STOP)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the RO-
TARY section [STOP] key. (The factory setting is 83.)
CC# V/C Select (MIDI Control Change Assign for V/C
Select)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the VI-
BRATO/CHORUS section [VIBRATO/CHORUS]
knob. (The factory setting is 84.)
CC# V/C Upper (MIDI Control Change Assign for
Upper V/C ON/OFF)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the VI-
BRATO/CHORUS section [UPPER] key. (The factory
setting is 85.)
CC# V/C Lower (MIDI Control Change Assign for
Lower V/C ON/OFF)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the VI-
BRATO/CHORUS section [LOWER] key. (The factory
setting is 86.)
CC# Percus On (MIDI Control Change Assign for
Percussion ON/OFF Switch)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the PER-
CUSSION section [ON] key. (The factory setting is 87.)
CC# Percus Volume (MIDI Control Change Assign for
Percussion Volume Switch)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the PER-
CUSSION section [SOFT] key. (The factory setting is
88.)
CC# Percus Decay (MIDI Control Change Assign for
Percussion Decay Switch)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the PER-
CUSSION section [FAST] key. (The factory setting is
94.)
CC# Percus Harmo (MIDI Control Change Assign for
Percussion Harmonic Selector Switch)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the PER-
CUSSION section [3rd] key. (The factory setting is 95.)
CC# Hold (MIDI Control Change Assign for Hold)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the Normal
Edit mode “Hold Uppr Ctrl” parameter and “Hold
Lower Ctrl” parameter, and the EX Edit mode “Hold
Ctrl” parameter. (The factory setting is 64.)
CC# Wheel Brake (MIDI Control Change Assign for
Wheel Brake)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the Global
mode “Wheel Brake” parameter. (The factory setting
is 93.)
CC# Amp Gain (MIDI Control Change Assign for Amp
Gain)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the Normal
Edit mode and EX Edit mode “Amp Gain” parameter.
(The factory setting is 92.)
CC# Reverb Level (MIDI Control Change Assign for
Reverb Level)
[1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the setting of the Normal
Edit mode and EX Edit mode “Reverb Mix Level”
parameter. (The factory setting is 91.)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Group 7
Program Mapper
Here you can specify how the program numbers of the
CX-3 correspond to MIDI program numbers.
When you press the [WRITE/ENTER] key, a screen
will appear in which you can view and change these
settings.
The left side of the screen shows the CX-3 program
number, and the right side shows the MIDI program
number. Use the [
√
][®] keys to select the CX-3
program number, and use the [–]/[+] keys to select the
MIDI program number.
Press the [WRITE/ENTER] key twice to execute the
settings.
Copy (Copy One Program)
This command copies the single program you specify.
For details refer to “Copying a program” (p.16).
Swap (Swap Program)
This command exchanges settings between the
specified programs.
Init Program (Initialize One Program)
This command returns the single program you specify
to its factory settings. For details refer to “Returning a
program to the factory settings” (p.16).