Kyocera SS-66K - Manual (Page 17)

17 Before Use
Before
Use
Battery and Charging
■ Removing the Battery
■ Inserting the Battery
2. Slide the battery release lever on the
back of the phone.
1. Align the battery with the phone and
push the battery in the direction of the
arrow to secure.
3. Swing the battery up and then lift it off
the phone.
2.
Place the battery lock lever (on top of
the phone) to the lock position.
Always switch off your phone before removing the battery. Failure to do
so may cause the phone to malfunction.
1. Release the battery lock lever on top of
the phone.
The battery has a limited life. While the lifetime of the battery will
depend on how frequently you use your phone, you should replace the
battery once a year. When you replace the battery, always purchase a
new KYOCERA lithium-ion battery of the same type.
Battery lock lever
Battery lock lever
Battery release lever
CAUTION!
CAUTION!
■ Charging the Battery
1. Insert the battery firmly in the phone.
If you charge the battery in a foreign country, check the voltage in that
country and adjust the voltage of your charger (AC Charger) as required
before charging.
2.
Plug the connector into the charging socket in the base of the phone.
3.
Plug the Charger cable into an AC power outlet.
• Do not handle the charger with wet hands.
• Do not use any device other than the charger bundled with your
phone to charge the battery.
• If the battery is left unused for extended periods, the battery may
become discharged so that it cannot be recharged as quickly as
usual by the charger.
Battery lock lever
Connector
Charging socket
Cap
CAUTION!
CAUTION!