Kyocera SS-66K - Manual (Page 60)

Clock (cont.)
60 Clock
■ Setting the Date (for "Once")
The "Set alarm date" prompt appears. The current date is displayed
between square brackets [ ]. If the alarm was previously set for the
"Once" mode, however, the previously set date is displayed.
4.
Use the numeric keys ( to ) to enter the desired date.
Enter the date on which you want the alarm to sound.
Pressing with a date displayed erases the last digit. Holding down
for 1 second or more erases all digits.
5. Press .
The "Set alarm time" prompt appears. Go to step 6.
■ Setting the Time
The "Set alarm time" prompt is displayed. The current time is displayed
between square brackets [ ]. If the alarm was previously set for the
"Once" mode, however, the previously set time is displayed.
6.
Use the numeric keys ( to ) to enter the desired time.
Enter the time at which you want the alarm to sound.
Pressing erases the last digit. Holding down for 1 second or more
erases all digits.
7.
Press .
Settings are now completed. The screen returns to the Alarm Select Menu.
■ Setting the Timer (for "Short range")
The "Set timer" prompt appears, with 00:00 enclosed in square brackets [ ].
If the previous alarm mode was "Short range", however, the previously set
time is displayed (not the remaining time).
OK
NOTE
OK
NOTE
8.
Use the numeric keys ( to ) to enter the time to elapse before
sounding the alarm.
Enter the desired time to elapse.
Pressing erases the last digit. Holding down for 1 second or more
erases all digits.
9. Press .
The settings are now completed. The screen returns to the Alarm Select
Menu.
If you set the Timer value to 00:00, the alarm mode will be automatically set
to OFF.
When the Alarm Sounds:
At the specified time, the alarm sounds according to the current Ringer Type
and Ringer Volume settings (as on page 52). An alarm message also
appears on the screen display.
To Stop the Alarm:
Press any key. (If no key is pressed, the alarm stops automatically within
30 seconds.)
NOTE
OK
NOTE