Kyocera SS-66K - Manual (Page 56)

The "Auto answer" function allows your phone to answer an incoming call
automatically a specified number of seconds (0 to 27 seconds) after
detecting the call.
1. Use / to select "Auto answer", then press .
The Auto Answer Menu is displayed with the current setting indicated by ● .
ON Enables automatic answering.
OFF Disables automatic answering.
2.
Use / to select to select the desired option, then press .
A ● appears next to the selected option. Press to return to the
Settings Menu.
If you select "ON", the screen prompts you to set the "Number of ring".
Use
to to set the number of rings between 0 and 9 (0 to 27 seconds),
then press . OK
NOTE
Quit
OK
OK
Settings (cont.)
56 Settings
5. Setting the Backlight ("Back light")
The "Back light" function allows the backlight to remain on for 10 seconds
after pressing any key.
1. Use / to select "Back light", then press .
The Backlight Menu is displayed with the current setting indicated by ● .
ON The backlight remains on for 10 seconds after any key is
pressed.
OFF The backlight is not activated after key operation.
2. Use / to select the desired option, then press .
The screen returns to the Settings Menu.
OK
OK
6. Setting Any-key Answer Mode ("Any key answer")
The "Any key answer" function lets you answer an incoming call by
pressing any of the keys
to , or .
1.
Use / to select "AnykeyAnswer", then press .
The Any Key Answer Menu is displayed with the current setting indicated by
● .
ON Enables to , or to answer an incoming call.
OFF Disables the any-key answer mode.
2. Use / to select the desired option, then press .
The screen returns to the Settings Menu.
OK
OK
7. Setting Automatic Answering ("Auto answer")
4. Setting the Type of DTMF Tone ("DTMF type")
The "DTMF type" function lets you set the type of DTMF tone to be used
for various remote services (such as Pagers) during a call.
1. Use / to select "DTMF type", then press .
The DTMF Type Menu is displayed with the current DTMF type setting
indicated by
● .
Short Sends a DTMF tone for +180 ms.
Long While a key is being held down, sends that key's DTMF
tone.
OFF Sends no DTMF tone.
2. Use / to select one of the options, then press .
The screen returns to the Settings Menu.
OK
OK