Kyocera SS-66K - Manual (Page 31)

31 Call Waiting
Call
Waiting
Rejecting an Incoming Call during a Current Call ("Reject")
The "Reject" function allows you to reject the incoming call during a call.
When an incoming call is waiting, press .
This rejects the incoming call and continues the current call in progress.
You can also reject an incoming call during a call and continue the current
call by pressing
to display the In Call Menu, using / to select
"Reject", then pressing . OK
Menu
NOTE
Sending a Busy Message to an Incoming Call during a Current
Call
("I am busy")
When an incoming call is waiting, the "I am busy" function posts the
message "I am busy" to the network.
1.
When an incoming call is waiting, press .
The In Call Menu is displayed.
2.
Use / to select "I am busy", then press .
This sends the message to the network, allowing you to continue the call in
progress.
OK
Menu
Ending a Call on Hold, Holding the Active Call, and Answering an
Incoming Call
("Replace2")
The "Replace2" function ends the call being held, puts the active call on
hold, and then answers the incoming call.
1. When an incoming call is waiting, press .
The In Call Menu is displayed.
2. Use / to select "Replace2", then press .
This ends the call already on hold, puts the active call on hold, then
answers the incoming call.
OK
Menu