Kyocera SS-66K - Manual (Page 34)

Multiparty Call (cont.)
34 Multiparty Call
Swapping the Held and Active Calls ("Swap")
The "Swap" function swaps the held and active parties. "Swap" appears
in the In Call Menu when there are both active and held parties.
1.
Press during a multiparty call.
The In Call Menu is displayed.
2.
Use / to select "Swap", then press .
This swaps the held and active parties in the call.
OK
Menu
Muting the Current Call and Canceling Call Muting ("Mute")
You can mute the current call.
1. Press during a call.
The In Call Menu is displayed.
2.
Use / to select "Mute", then press .
When the call is being muted, no sound is sent to the other party.
3.
To cancel call muting, press .
This restores the call.
Unmute
OK
Menu
Switching DTMF Tones On/Off ("Tone Off(On)")
You can switch on and off DTMF (Dual Tone Multifrequency) tones, which
are used for remote services (such as Pagers)
1.
Press during a call.
The In Call Menu is displayed.
2. Use / to select "Tone On", then press .
DTMF tones can now be transmitted.
"Tone Off" appears as an option in the In Call Menu when DTMF tones are
available.
NOTE
OK
Menu