Kyocera SS-66K - Manual (Page 23)

25 Basic Telephone Operations
Turning
the
Power
On/Off
Basic Telephone Operations
Basic Telephone Operations
Making a Call
To ensure the best communication quality, operate the phone in open
areas with the antenna fully extenteded and vertical to the ground.
1.
Hold down .
A plus sign (+) appears on the screen.
Pressing twice to display "00" has the same effect.
2. Enter the country code followed by the area code.
Major country codes are listed on page 94.
3.
Enter the desired phone number, then press .
The entered phone number is displayed on the LCD panel. The phone
number for an international call can be up to 28 digits long including the "+"
sign.
• Pressing erases the last digit you entered as part of the phone
number. Holding down for 1 second or more erases all the phone
number digits you have entered.
• If the entered phone number has been registered in the Phone Book, that
party's name is displayed on the LCD panel.
• If you have entered the phone number first, press to display the
country code select screen. Use / to select the area and country,
then press .
• Pressing registers the entered phone number in the Phone Book.
(See page 40.)
• You can dial a phone number retrieved from the Phone Book. (See page
27.)
• Pressing during a call displays the last number dialed. (See page
45.)
• You can use / to control the volume of the earpiece speaker
Store
OK
INT'L
NOTE
NOTE
NOTE
NOTE
Engaged
Congestion
Radio Path Unavailable
Number Not Obtainable
Authentication Failure
Channel Busy FDN Restricted
Bearer Capability
Emergency Only
Max Charge Exceeded
Barred
Answering a Call
Make sure that your telephone has power on in a place with a sufficient
signal strength available and that the Services/Barring/Incoming setting is
OFF.
1.
When you receive an incoming call, the ringer sounds in the alert tone
which has been set.
The LCD panel displays the "Incoming Call" phone status. If the caller's
phone number notification setting is ON, the caller's phone number is
displayed. (This service will become available in the future.) If the caller’s
phone number and name have been registered in the Phone Book, the
caller’s name is also displayed.
Some networks do not provide the caller's phone number even if the
notification setting is turned on.
2.
To answer the call, extend the antenna, then press or .
You can now talk to the other party. To reject the call, press or .
• You can adjust the ringer volume using / . You can also change
the type of ringer tone.
• If you reject an incoming call, the LCD panel displays "Call Missed" along
with the time at which you received the incoming call.
• You can answer an incoming call even during another call. (See page
30.)
• You can answer an incoming call even with Keylock on.
NOTE
Rej
Ans
NOTE
If you fail to make a call
If you fail to establish a connection while dialing, one of the following
messages is displayed, indicating the failure:
during a call. To adjust the volume while setting a function, press first
to display "±" at the bottom of the screen, then use / .