Switchover between tv and radio programmes, Information about the current programme, Adjusting the volume – Kathrein UFD 510 User Manual

Page 14: Electronic programme guide and applications

Advertising
background image

Electronic programme guide and applications

14

Leading zeros must be omitted.
After the programme changeover, the programme slot, programme name and time
are superimposed on the upper part of the screen for approximately. 3 seconds.

If the particular programme is encrypted, the character

appears on the left

next to the programme slot

Switchover between TV and radio programmes

Whilst a TV programme is running you can switch over to a radio programme.

Press

the key on the remote control.

The receiver switches over to the most recently used radio programme slot. With
the same key you can also switch back to the TV programme.

Information about the current programme

Programme information giving the programme slot, programme name and time is

called up via the

key. If further information relating to the current and

subsequent broadcast in the DVB data stream is also present, this is displayed as
well.

Adjusting the volume

Ensure that the TV set‘s volume control is set to a comfortable listening level for
the room.

Adjust the desired volume using the

key on the remote control, pressing

either “+“ (louder) or “-“ (quieter). A 15-level bar display appears on the screen
which indicates the volume selected. This volume bar can be seen only when
the TV set is turned on.

Advertising